| |
 |
MEMTECH ACOUSTICAL NOISE CONTROL
Industrial Noise Control,
Noise Reduction Solutions,
Noise Containment, Noise Dampening,
Classroom Acoustics, Industrial Hygiene Services,
Rapid Roll Doors, Pipe Insulation, Noisekiller |
 |
|
|
Memtech, Inc.
9033 General Drive
Plymouth, MI 48170
|
Phone: |
800-634-4471 |
| |
734-455-8550 |
|
Fax: |
800-634-4472 |
| |
734-455-8552 |
|
TECH
PRODUCTS ~ VIBRATION,
SHOCK, IMPACT
TECH
PRODUCTS
Low Frequency Mounts
Low Frequency Mounts are made
for your toughest vibration applications. They tame the effects of paint
mixers, air conditioning units, air compressors and more, indoors and out.
There are models for loads from 50 to 4,700 lbs. which exhibit 3.5 Hz
natural frequency at maximum load.
For immediate service email
salesinfo@memtechacoustical.com
|
 |
|
Typical
Mounting Application
|
Low
Frequency Mounts' unique design bonds a steel spring inside a matrix of
oil/ozone-resistant neoprene. The springs absorb low frequency
vibrations, slowing and passing them on to the resilient neoprene. This
material - made even more stable by the springs-interrupts the sound
path, prevents noise amplification caused by sounding board effects, and
stops vibrations from being transmitted to the floor or work surface.
|
Part
No. |
Color
Code |
Min.
Load |
Approx.
Defl. |
Max.
Load |
Approx.
Defl. |
| 61060 |
Yellow |
150
lbs. |
0.1" |
1800
lbs |
1" |
| 61062 |
Green |
500 |
0.15" |
3100 |
0.9" |
| 61064 |
White |
1200 |
0.2" |
4700 |
0.8" |
| 61503 |
Yellow |
50 |
0.1" |
400 |
0.9" |
| 61505 |
Green |
100 |
0.1" |
1100 |
0.9" |
| 61507 |
White |
250 |
0.1" |
2600 |
0.9" |
|
TECH
PRODUCTS
High
Thrust Air Silencers
PVC (54006)
High Thrust Air Silencers
provide maximum efficiency at pressures up to 100 psi, making them ideal
for use in parts ejection, conveying, drying and cleaning operations.
(Filter separators are necessary in lines where silencers are used.)
These silencers are made of high strength polyvinyl chloride. Not
recommended for pressures over 100 psi or temperature in excess of
170°F.
For immediate service email
salesinfo@memtechacoustical.com
|
|
|
PVC (54006)
High Thrust Air Silencers are designed for low noise, high thrust and
maximum efficiency. They save energy by using little compressed air to
produce extremely high thrust and back pressure. Outside air is
entrained to create air output more than 40 times the compressed air
input. Noise is reduced as much as 20 deci-bels compared to an open tube
at 120 psi.
|
| Part
No. |
A |
B |
C |
D |
Weight |
| 54006 |
1/4"
NPT |
7/8" |
3
1/4" |
1" |
1
oz. |
|
Aluminum (54002 and
54005) Offering as much as 20 decibels of noise reduction and high
thrust for parts ejection, conveying, drying and cleaning, High Thrust
Air Silencers feature aluminum construction with no moving parts
|
| Part
No. |
A |
B |
C |
D |
Weight |
| 54002 |
1/8"
NPT |
11/16" |
2
7/16" |
0.7" |
3/4
oz. |
| 54005 |
1/4"
NPT |
7/8" |
3
1/8" |
0.9" |
1
1/2" |
|
|
|
